Error codes for Canon MP140, MP150, MP160, MP190, MP210 and MP220 printers | en.Rellenado

Error codes for Canon MP140, MP150, MP160, MP190, MP210 and MP220 printers

Advertisements
Here are some of the most frequent error codes that show up on Canon printers. Once we theses codes show up, we can restore both regular and Multifunction printers made for domestic use. If we do this, we can solve many problems that appear after refilling our ink cartridges.

If you have any question, you can post it in a comment in the section below this post and we get back to you as soon as possible. Please post your comment using a valid email account so you can receive a message once we’ve answered you.

The following error codes on MFP MP140, MP150, MP160, MP190, MP210 and MP220 printers will stand out: your printer’s LED will blink yellow several times, followed by one long, green blink.

Message shown on screen
Number shown on screen
Error code
Meaning
Solution
Additional notes
E2
2
1000
Out of paper
Put paper sheets in the paper tray and press the Resume/Cancel button
If there’s paper in the tray, there could be a foreign object inside the tray, blocking the flow of paper sheets, or a damaged knob.
E3
3
1300
Paper jam
Remove the jammed paper sheet, close the printer’s lid and press the Resume/Cancel button
If there isn’t an actual paper jam, check the paper sensor inside your printer. This error can cause roller  and/or printer  malfunction.
E4

1600
No ink
Place the ink cartridge back in the printer
In order to print with the ink left in your cartridge, click on the Continue button, marked with a triangle inside a circle
E5
5
1401
1485
1687



There aren’t any ink cartridges installed in the printer / Wrong ink cartridge for this printer model / The toner cartridge hasn’t been installed properly
Install the appropriate ink cartridge in the printer
If you’re using the proper ink cartridge for your printer mode, reinstall it, clean the contacts on the cartridge and the carriages. If this doesn’t help, replace the ink cartridge entirely.

To find out if the ink cartridge is faulty, look at its current status on the computer screen, remove both ink cartridges and place them back inside one by one. If there are more than two colored ink cartridge in the printer at the same time, the printer will usually say the Black one is defective.
E8

1700
1701
Warning: the Ink Waste Absorber is 95% full
Press the Restore/Cancel button to continue
The MPF will become blocked after the waste absorber has filled 100% and won’t work until you reset the counter back to zero (0)
E9

2001
The MFP isn’t compatible with the digital camera attached to it
Turn the camera off and press the Restore/Cancel button to continue
This MFP cannot work with this particular digital camera
E14

1684
MFP doesn’t recognize the ink cartridge (this ink cartridge doesn’t fit in this printer model)
Located on the proper IFI ink cartridge for this particular MFP model

E15
15
1682
The ink cartridge isn’t installed
Located on the proper IFI ink cartridge for this particular MFP model

E16

1685
1686
The MFP can’t determine the amount of ink left in the ink cartridge (B set and/or refilled ink cartridges)
Replace the toner cartridge or disable the ink level monitor
To disable the monitors, follow the instructions that will appear on the screen of the computer this Multifunction Printer is attached to
E19


Failed to scan head alignment sheet

This information has been gathered from external sources such as http://www.startcopy.ru/codes/canon_mp.html, and has been translated and modified according to our needs. If you own this data and have a problem with it being published on this blog, please contact us.

Advertisements

No comments:

Post a Comment