How to refill a 132 HP black ink cartridge | en.Rellenado

How to refill a 132 HP black ink cartridge

Advertisements
The 132 HP black cartridges give a laser like quality to the printings; these Vivera cartridges, of high performance are compatible with HP Photosmart 7850 Printers, HP Deskjet 5440 Printers, HP PSC 1510 All-in-One Printer. These cartridges are rated for about 210 pages and can be refilled with about 5ml of pigmente ink.

Provided the ink quantity mentioned above with the following procedure. Follow the procedure

Instruction on how to refill a 132 HP black ink cartridge:

Before starting it is recommended to clean the cartridges connectors; it is necessary but not mandatory since these cartridges are of good performance, however, if cartridges have not been used for a long time, there could be dried ink in the cartridge heads which is not good. It is adviced to read how to clean the cartridge heads.

When the cleaning process is finished, I repeat is not mandatory but in case you want to better do it after the third refill, continue with the refill procedure.

Step No. 1
Place the cartridge on a surface where ink spills do not cause trouble. It is recommended a surface of dark color or even flat surfaces where ink spillings can be remove easily, white or light color surfaces are not recomended since the ink cannot be removed from them.

Step No. 2

Now proceed to remove the label on the top of the cartridge indicating its number. It is recommended, before refilling the cartridge, to remove that label and so allowing entering the needed airflow for printings to have the best quality and maximun performance the cartridge was made for. — slowly remove the label to avoid it to get damaged
label ink cartridge
label ink cartridge
Several holes located in the in the back part of the cartridge can be used to disperse most of the ink.

Step No. 3
Slowly supply 5ml of ink, please very S-L-O-W-L-Y, it is needed to be done this way so the ink inside the cartridge can spread well and fill the entire sponge of the cartridge.
ink for fill
ink for fill
Step No. 4
When the cartridge is already filled, all that is left to do is to print a test page with this cartridge, it is recommended to leave the cartridge inside the printer.

Even though this entire procedure has been followed there are ways around that something gets wrong, so please contact us through a comment on this post, we will help you immediately.

It is recommended to print a test page after filling the cartridge, to do it visit our post about how to  print a test page from Windows.

Also, a test document can be printed to identify if everything is working well. To do so, it is recommended to click on the following link. Print this test page for black cartridge. This document is easy to print

If after filling up the cartridge it continues having problems or flashings, try the following steps:

— Remove the ink cartridge and clean the connectors with some wet napkin.
— Clean the printer connectors as well.
— If there is still no solution, turn the printer off and unplug it from the power supply for about 10 minutes and then plug it again and place the cartridge.
— If there is no change, please contact us.

Advertisements

No comments:

Post a Comment