How to solve the Cleaning Impossible or Error 46 in Brother Printers | en.Rellenado

How to solve the Cleaning Impossible or Error 46 in Brother Printers

Advertisements
We already know how to clean the heads in Brother printers, and we know that these printers automatically perform this head cleaning as well when printing.

When turning on the printer also perform a head cleaning but sometimes it does not due to some bottlenecks in its settings and then the Error 46 shows up we have done a previous presentation on how to solve the Error 46 in Brother printers, the fact is that we found this other method that works for some Brother printers and the most options we have the better chances to get a solution for this error.

The process is simple and works 100% of the times in case it does not totally work get in contact with us or visit the other post about this same error.

To solve this error it is needed to reset the printing counter of the Brother printer and the following procedure is what will solve this issue.

You can use this resetting process in any other Brother printer but there is no guarantee it will work however from doing nothing better is to give it a try.
  • Unplug the printer from the power supply as well as from the USB cable.
  • Press the “Menu” button and keep on doing it while plugging the printer to the power supply. The printer will start a maintenance process and in its screen it will show the “Maintenance” message, when this happens you can release the "MENÚ" button.
  • In the keyboard press the up arrow key, press it until getting to the “8” number and then press “Settle”.
  • Then press the up arrow key again until getting to the "0" number and then press “Settle”.
  • Now start pressing the keys "Start/Black" until getting "PURGE:06414" in the screen.
  • Next press the up arrow key  until getting to the "2" number and press “bid”, continue  pressing the up arrow key until getting to the “7” number and then press “bid” then do the same with the "8" and the "3" number.
  • Now it can be seen that the counter is showing "PURGE:00000".
  • When this happens press "Quit or Stop".
  • Again press the up arrow key until getting to the “9” number in the screen and then do the same until it shows the "9" number again.
“In case you do not get any solution in this post we advised to visit how to solve the Error 46 in Brother printers, you can get a solution in the same way.”

Advertisements

No comments:

Post a Comment