Solution to error Kyocera-Mita printers | en.Rellenado

Solution to error Kyocera-Mita printers

Advertisements
The Kyocera-Mita printers are normally used for office use, do not have much marketing but are very durable and economical printers.

They are mostly toner printers, and business strengths to work without any problem.
You may any day stumble us with a general error for this printer, we can put to work very hard and resists but one of these days we get an error on the main screen of the printer is normal because we do not have to worry then leave a list of codes that can make these printers and possible solutions thereof.

If you think the problem is too complex to seek assistance from Kyocera support in your region or who sold you the printer, then the list of the most common mistakes that can occur in these printers.
CodeMeaningPossible solution
A2Overheating fuserAdjust the fuser temperature.
A6Fuser / cartridge does not rotate at the correct speedRestart the printer. If the error persists, please contact technical support.
A7Power supply fan is not rotating at the correct speedRestart the printer. If the error persists, please contact technical support.
A8Ozone fax that does not rotate at the right speedRestart the printer. If the error persists, please contact technical support.
A9Roll Multipurpose has an errorClean the rollers.
B7Transfer Roller is not reset properly after completion of workRestart the printer. If the error persists, please contact technical support.
C1Error communicating with the duplex unitRestart the printer. If the error persists, please contact technical support.
C3Motor duplex feed is not working properlyRestart the printer. If the error persists, please contact technical support.
E0Communication errorMake sure all cables are plugged Restart the printer. If the error persists, please contact technical support.
E2Scanner Motor not working properlyRestart the printer. If the error persists, please contact technical support.
E8Fuser needs to be replacedPlease contact support for help with replacing the fuser.
E9Cartridge engine is not working properlyKyocera-Mita Remove the toner cartridge and reboot.Reinstall the cartridge.
C037Microcomputer, ironing motor or main board does not work properlyPlease contact technical support.
C640Hard disk space can not be accessedMake sure the hard drive is locked in place. Restart the printer.
C10Exposure lamp does not work properlyUse the reference manual to locate the lamp and make sure it is connected. If the error persists, please contact technical support.
C210Motor carrier Paper does not work properlyRemove the jammed paper obvious.
C230 o C2500Paper feed motor not working properlyRemove the jammed paper obvious.
C7300Cartridge to be read as the vacuum level, the toner not determinedRemove the cartridge and run a cold start. You can also shake the cartridge to redistribute the remaining toner. If the error persists, replace the cartridge.
C7800Humidity sensor board does not work properlyReplace the board of moisture or contact technical support sensor.
C8140Malfunction of the main paper tray - could be sensor or engineRemove the tray to remove dirt and dust from the sensor and rollers. Reinstall the correct tray and try printing again.
C91Wireless network printer does not work properlyMake sure all cables are properly connected.
E07Media type and tray are not in lineUse a different paper tray, change the paper type, or change the paper settings.
E70Previous task was not completedCancel the incomplete task or delete the print queue.
E90Memory full - unable to complete the taskYou can clear the memory to reset the printer or break the task up into multiple jobs.Another option is to upgrade the printer memory.
OP1 OP5A drawer or cover is openClose all drawers and tapas.
U00602Paper JamRemove the paper jam.
U00603The document does not feed correctlyClean the rollers and use the alignment tabs on the paper tray toward the center of the paper.
U00614Paper is almost outLoad more paper in the tray.
U00615Paper is notLoad more paper in the tray.

Much help can serve use the manufacturer's documentation, know that not all of these codes compatible with Kyocera-Mita printers, and you may not solve all without the help of a service representative. This publication was translated and adapted by +José Altagracia Paredes  walls and created in principle by Greg Gladman

Advertisements

No comments:

Post a Comment