Uncover injectors Epson Stylus TX235W | en.Rellenado

Uncover injectors Epson Stylus TX235W

If the pages we print are coming very clear or striped it is necessary that we make cleaning to the injectors of our Epson Stylus TX235W printer so it will need to use the buttons on the printer or the printer program that gives access to the configuration.

You should know that if there is a cartridge that does not have enough ink that is why we need to review all cartridges in order to check if they have the right amount of ink.
First thing we do is check the nozzles, to verify if they are clogged to continue the process.

How to check the nozzles? First thing we do it is turn off the printer, put normal A4 sheets in the printer pressing the cancel button on your printer and turn on the printer again with the cancel button pressed.

When the machine is on we release the two buttons on the printer will print a test page where you can check the quality and condition of the injectors. see image below...
clean and dirty print heads in Epson
clean and dirty print heads in Epson
If we have a clean head we must review the document that we are sending or revise the electricity power cord, if we have a dirty head we must proceed with cleaning both normal head cleaning thoroughly Epson head.

Make cleaning nozzles in Epson Stylus TX235W Printer: Before you begin cleaning we have to check that none of the indicators marking an error loaded pages of plain paper then hold down the button to cancel  at least three seconds for the printer begin the cleaning process, the indicator blinks consecutively while a process is heard in the printer.

If there is no improvement in the printer wait about 6 hours with the printer at rest and does the cleaning again but this time head thoroughly.


No comments:

Post a Comment