How reset the pads in Epson Stylus TX235W | en.Rellenado

How reset the pads in Epson Stylus TX235W

Advertisements
Periodically printers need a system reset, the adjustment is a software program developed to tell our printers do not print much has enough pages to print pillows are filled.

At least 15,000 pages to the printer has an error, the print pads are full, we have two options, one is to take the printer to support us or the other is to service the printer.
If the printer has an ink system installed, do not attempt to take the printer where Epson technician immediately make any modifications to your printer is lost the warranty. (the Epson support is priced)

Then the program and steps for running this program and eliminate the error of printing pads are packed in our printer.

Buy the reset with Paypal...
Download program to reset pad printers Epson Stylus TX235W

Our program downloaded proceed with execution of Adjustment Program follow the steps below, please check if the printer really is the model you have, avoid changing the printer software.

Step No. 1 (decompression program)

When you download this program will be in a compressed file, we unpack using programs such as Winrar or anyone else to do this function, if you have one of these installed programs will only receive a program that can not be opened by the computer.
adjusment epson stylus tx235w
adjusment epson stylus tx235w

Step No. 2 (run to start the adjustment program reset)

With the documents in a folder unzipped the next step is to run the program, double click RESET_EPSON_TX235W.exe or left click and select Open.

A window asking to accept the terms and conditions of the program will appear, we must accept and wait a moment until it runs completely.

Then a window where we select the printer and the port that this is connected appears. see image below...
select the port and printer model
select the port and printer model
It is recommended to verify that the printer appears on the list, is just the printer that you want to reset, in case of another is even rename the printer.

The port is selected automatically, and can also verify know which port your printer is connected.

Step No. 3 (start the adjustment process particularly reset mode)

When you have selected the type of printer, automatic port and the language you need the printer settings you click OK, return to the main page and must click particular adjustment mode in the bottom right.

We will be directed to a program window where all the settings you can do with this printer, select only one of all Waste Ink Pad Counter, located in Maintenance. Then we press OK.

Step No. 4 (complete the process of resetting Epson printer "terminate")

Finally the window to waste ink pad counter, where we will select all options check & initialization appears, then click on check when check all is well pressed initialization and finish at the bottom of the program.

Turn off the printer and turn it on again, you may need to select another printer as the default printer, no other model than the same printer but then the name will (copy 1).

Advertisements

No comments:

Post a Comment