Follow the steps below to fill the PG-445 and CL-446 cartridges, be very careful with the level of ink applied, if you have any questions, type a comment.
The ink cartridges black Canon PG-445 and CL-446 tricolor both compatible with the Canon PIXMA MG2440 printer, you can still consider high-yield cartridges, printing about 180 pages 180 black and tricolor.
They are still high yield if we compare with cartridges of the same price and the same generation but other manufacturers refilling these cartridges do not have much science, less if you use our recommendations and follow to the letter.
Always remember that you need help, write a comment with plenty will be attended and responded as quickly as possible, can also clarification or recommendation.
The first thing we recommend to fill a cartridge, you have one easy cleaning or black color, it matters not to get ink, appropriate tools including syringes, water — based inks and pigment — the pigment is not easy to get, if it can use only water-based colors for both — a syringe for each color it is a very important factor.
The amount of ink to be put each cartridge is 12ml of ink in the tri-color cartridge divided into four 4ml for each color, they must be injected without any additional drilling cartridge, the syringe with the ink should penetrate the plastic holes that note and deliver the ink slowly.
They are still high yield if we compare with cartridges of the same price and the same generation but other manufacturers refilling these cartridges do not have much science, less if you use our recommendations and follow to the letter.
Always remember that you need help, write a comment with plenty will be attended and responded as quickly as possible, can also clarification or recommendation.
The first thing we recommend to fill a cartridge, you have one easy cleaning or black color, it matters not to get ink, appropriate tools including syringes, water — based inks and pigment — the pigment is not easy to get, if it can use only water-based colors for both — a syringe for each color it is a very important factor.
 |
| canon ink cartridges PG-445 / CL-446 |
It is possible that some ink spilled on where you're filling is why it is recommended to do it on a surface that can be cleaned easily, for the black ink cartridge, you must supply 8ml ink through the holeIt appears in the image and just as colors, slowly and slowly.
Place the cartridge label, this will prevent the ink runs out quickly, the top holes cartridges take air to enter the exact amount of air that allows the print cartridges.
Then refill cartridges, it is recommended that a cleaning head, if unable to do cleaning, you only need to print a page of all colors in top quality.
COMMENTS