How to run the software to reset Epson printing pads | en.Rellenado

How to run the software to reset Epson printing pads

Advertisements
If you're in this publication may not know or are not sure how to run a program called adjustment, which supposedly will help eliminate the error of "printing pads full" in Epson printers.
You do well to read this post, many people have damaged his printer trying to run the program to fix the error associated with pads print is a bit complex because if you execute the program does not correspond to the printer this will change your model completely.

Error can be expensive because the printer may not even recognize the cartridges you use, the software will not work and of course nothing can function properly as you have like another printer.

The importance of checking the model of your printer and software support you're trying to run, is one of the most important factors and so this publication.
check correctly the printer model
check correctly the printer model
You see in the picture above, the arrow indicates the printer model in this case is an Epson L210, if your model, should appear in the EPSON Adjustment Program, can help our post on how to identify which model printer.

The port where the printer is connected, you do not know how to configure it is recommended to leave the default that is auto selection, in this way the reset detect where the printer is connected and reset the printing pads the same way as if we selected — is important that only an Epson printer is connected at the time of the restoration — if more than one unit may be apply in the wrong printer.

Already then select the model or verify that the pattern shown is correct, the next step is to click particular adjustment mode, located at the bottom left of the window.

In the next window we select the — Maintenance — the option (Waste Ink Pad Counter) leave selected and click OK which will be directed to the last window to complete the process.
waste ink pad counter reset for Epson
waste ink pad counter reset for Epson
One important thing is not to touch or select any other option, this is very complex procedure and may unintentionally damage any printer.

Make the process as it says the image, select the first waste ink pad counter and then click ok — bottom right — before going to the next window ensure no other option is selected.

And finally it opened the last window that allows complete and return the pads print completely, you only need to follow the steps described below, if the process does not work with your printer, type a comment, writing which is the printer and adjustment is using.
last step to restore pillows
last step to restore pillows
As shown in the image in numbers is the way as it should be done the last steps by first selecting the main pad counterthen if there is any other option to select the "select" — click on check, verify that there is no no error and continue with initialization and finally we click finish.

A message of the restoration is complete should appear, we click to accept and restart the printer — usually done off and on the printer — and all must work properly and error disappear.

It may be necessary to change the default printer as the previous present now after his name (copy 1) making the printer to another, you will not need to reinstall the drivers for your computer if you use Windows Vista or higher operating system.

Advertisements

1 comment:

  1. why is my printer cannot print, after i reset the inkpad?

    ReplyDelete