The 10 most frequent causes for an ink cartridge is damaged | en.Rellenado

The 10 most frequent causes for an ink cartridge is damaged

Advertisements
The ink cartridges have become more than important in offices or homes that have a printer or copier injection, this device along with the printer we can save time and money by printing from the comfort of our home or work.
hp ink cartridges by Matthew Stones
hp ink cartridges by Matthew Stones
Get a these printers today is not difficult, the ink jet printer work with the same technology, and the price of the equipment is less expensive than laser technology devices.
The problem began when we feel the need to replace the ink cartridges with new ones, since the manufacturer sets the prices cartridges are very high for consistent income and make the cheapest printers when acquisition talks.

Many consumers feel the need to use alternative techniques to save money on printing costs, such as ink system printers, refill cartridges and generic cartridges or manufactured ink.

This works but not the same as the original cartridges, liquid used to fill the cartridges and cartridge plastic quality is not the same, never the same print quality that must have.

If we can save some money and get considerable quality, but we must follow a series of steps that will work to maintain and prevent problems with future cartridges affecting print quality, then a list of the ten most frequent causes by which damaged or lost as a cartridge easily.

No. 1 - Fill in the ink cartridge runs out immediately

If a printer with continuous ink system or an ink cartridge that we fill, you should not spend the ink inside the cartridge, or expect this to happen to fill it.

When the ink cartridge is spent inside or for any reason when the print cartridge is out of ink, this will make both connectors and printer cartridge circuit contact burn, damaging the cartridge forever to heat up beyond repair.

No. 2 - Use the correct ink cartridge

You should emphasize this part even more when using cartridges in continuous ink system, because the cartridges do not cease to function as it did not have the system.

Using ink that carries say "pigmented" or "water-based (ink dye)" the print quality will be better and less likely that the print head, to know that ink used your printer tape is recommended publication below.


No. 3 - Make every so often cleaning head

Is any printer you use, they all have a procedure called head cleaning, with which pulls a considerable amount of ink cartridge that will help eliminate any obstructions and impediments have to head right out the inkjet printer.

This should do it only when necessary, since the ink levels tend to drop suddenly done can help in this blog publications related to various printers such as:

No. 4 - allowed to stand the cartridge between prints lot

Most cases, the cartridge is damaged by the printhead, which is burned and this prevents us print.

The hot emitting print head cartridge is dangerous, therefore it is recommended only small proportions of pages printed without forcing the printer so it does not burn the cartridge head.

If you have a home printer, and to print 50 pages, it is recommended to do it in two with breaks of 15 minutes to the printer, thus ensuring better print quality and durability in the cartridges.

No. 5 - Do not leave the cartridge in extreme temperatures

It is best to leave the cartridge at ambient temperature, as the ink components at either extreme of temperature will damage.

For example a very hot temperature, will cause the drying component of the ink, is altered within cartridge it goes unused ink and drying the sponge completely.

In very cold temperature, the ink becomes a viscous liquid that when I was sent to print only clog the printhead, damaging the cartridge forever.

No. 6 - The cartridges should be protected to the air

If we cartridges outdoors, damaged more easily than if we even wrapped in paper, and the heads are of a material that oxidizes easily, air can cover them and damaging this part is considered as important.

No. 7 - Do not leave anything touching the print head if the cartridge have ink

While it is recommended to leave the involved cartridge if not use it, you should not leave this pasting the head, much less if paper, ink cartridges in the head with great sensitivity and active up to stick a finger.

Leave a filled or empty ink cartridge hitting the head to any surface or object, it is an ink spill completely, maybe it's not such a big damage all ink spilling but when the connectors are touched by it.

No. 8 - Put the correct amount of ink cartridge

If you do not know the amount of ink that takes its cartridge, see our how much publication ink I put my cartridge, but it really is easy as the manufacturer supplies the information in your product of those (ml) has been put to the cartridge.

If you not know the amount of ink used by your cartridge, just write a comment, gladly be answered.

No. 9 - Keep the cartridge label to put after being filled

The ink cartridges all have a label at the top, this label has a function - just let the correct amount of ink to the print cartridge - if we remove this tag will spend more ink than normal causing spill inside the printer.

Another thing is to be placed in the way as it was before, because if done otherwise this will obstruct channels that have the cartridge at the top and not pass the ink to the head burning the cartridge over time.

No. 10 - Even though not needed, then their respective maintenance


The ink cartridges in the printer are the ones who get dirty, but the ink comes out when the fill head while the printed and in the process of swinging sticks printer cartridge causing dirt difficult to remove.

A cleaning cartridge (outside), can prevent a stain on the connectors then not be possible to eliminate also uncover or make the process to unclog cartridges at home, or with tools that get in the house helps.

In this way the cartridge when the hard times come will endure a little more work, otherwise if you have a problem cartridge and you need a solution, just write a comment, gladly be answered.

Advertisements

No comments:

Post a Comment