You will learn how to refill the HP Black 136 ink cartridge in four easy steps.
The HP Black 136 ink cartridge yields up to 220 pages when is brand new and about 170 pages when it has refilled, this ink cartridge is made of water-based ink and is compatible with HP Photosmart 7850 Printers, HP Deskjet 5440 Printers, HP PSC 1510 All-in-One Printer.
To learn how to refilled this ink cartridge and save money, please follow the instructions below. You can always contact us if you need help by leaving a comment in the comment section below and we will get back to you as soon as possible.
We highly recommend cleaning the cartridge contacts before starting with the refilling process. Cleaning the contacts will help remove dry ink and give the cartridge high performance.
Step No. 1
Place the cartridge on a flat surface when you can easily work on it. To protect the flat surface from ink spills use an old piece of clothing to cover this surface.
Step No. 2
Carefully and slowly remove the sticky label from the ink cartridge, the one with the number and the cartridge color. Removing this label will allow a certain airflow into the cartridge to provide a better quality print.
The picture above shows you the ink cartridge with the label removed. as you notice, the ink cartridge has several holes but we recommend using the one in the top to refill the cartridge.
To learn how to refilled this ink cartridge and save money, please follow the instructions below. You can always contact us if you need help by leaving a comment in the comment section below and we will get back to you as soon as possible.
Instruction to refill the 136 HP black ink cartridge
We highly recommend cleaning the cartridge contacts before starting with the refilling process. Cleaning the contacts will help remove dry ink and give the cartridge high performance.
Step No. 1
Place the cartridge on a flat surface when you can easily work on it. To protect the flat surface from ink spills use an old piece of clothing to cover this surface.
Step No. 2
Carefully and slowly remove the sticky label from the ink cartridge, the one with the number and the cartridge color. Removing this label will allow a certain airflow into the cartridge to provide a better quality print.
 |
| Ink cartridge label. |
Step No. 3
Slowly inject 5 ml of ink into the cartridge, you must do it very slowly to allow the inner sponges to soak all the ink.
 |
| Syringe |
After completely inject the 5 ml of ink into the cartridge, put back the sticky label as it was before and then print a test sheet to see how the cartridge is working. To learn how to print the test document, please follow this link: How to print a test sheet.
Even if you have correctly followed the instructions, the ink cartridge might still not properly working. If it is your case, check the additional instructions below:
- Remove the ink cartridge and clean the connectors with some wet napkin.
- Clean the printer connectors as well.
- If there is still no solution, turn the printer off and unplug it from the power supply for about 10 minutes and then plug it again and place the cartridge.
- If there is no change, please contact us.
COMMENTS