Resetting of the TX121 Epson Stylus printer

Here are the best way for reset you Epson Stylus TX121 printer, follow the next steps.

The TX121 Epson Stylus printers can print, scan and high quality copy, when the cartridges are out of ink you can use just one ink cartridge, you do not have to change all of them just the one out of ink.

18 bits and up to 1200 dpi scanner, prints up to 28 ppm in black and about 15 ppm in color printings. It prints in Letter, Legal (21,6 x 35,6cm), A4, B5, A5, A6, report, executive, statement sizes, user-defined: (8.9 to 21.6 cm) x (8.9 to 111 , 7cm) envelopes: No. 10, DL, C6 it is compatible with Windows® Vista®, XP, XP Professional x64 Mac OS® X, 10.4.11, 10.5.8 - 10.6.x

Before resetting this Epson printer or any other printer you must take into account that no other Epson printer can be plugged to the same computer regardless to their brand, because this can only damage the printer functioning.

Perform this process as said next to obtain a perfect functioning, in case you need additional help contact us.
The first thing to do is to download a file to perform the resetting of the printer download the program by visiting the reset Epson Stylus TX121 link.

Step No. 1
When the file is downloaded you will see it is a zip package, it has to be unzipped and to do so it is recommended to use WinRAR, to know how to unzip see the following manual on how to unzip a document. see image...

click on Extract here and a folder will appear

Step No. 2
After unzipping the file double click on the file with the following image. What you need is to run this file and it can be tone by right clicking on it and running it.

Step No. 3
A message will be displayed indicating that this program is for free and then click on “Accept.”

Step No. 4
In the next step what you have to select is the option “Select” which is located in the top right of the screen. see image...

click on select

Step No. 5
Then a window will be displayed allowing you to select the port the printer is plugged to, chose the Auto Select option and click on OK. see the following image…

leave the port in Auto Select

Step No. 6

In Model Name the name of the reset you are trying to install will be shown, since the "Destination" part won’t be modified and in Port leave the default option in this case is "Auto Select" see image above, in case of questions leave a comment.

After clicking on OK, the window where you select Auto Select will disappear, and the main program window will remain, in this window select Particular Adjustment Mode option. see image...

particular adjustment mode

Step No. 7

In this step you have to be really careful, any other options chosen by mistake can be fatal for you printer, so much so that it can delete the printer settings forever, it is recommended to select just the option we will tell.

The option you have to select is called Waste Ink Pad Counter and then click on OK to continue.

This will restore the printer and indicate that there is not ink waste, although doing this procedure you must be aware that the ink waste is full, though perhaps the printer gets to indicate this due the amount of pages printed, but the truth is that it can cause damages over time.

just click on waste ink pad counter

After selecting this option click on OK

Step No. 8

Now choose all the options display to select, afterwards click on CHECK, to verify that everything is all right, click on ACCEPT, then click on INITIALIZATION and when the process is finished click on FINISH.

At the end of all this process turn off the printer, wait for about 30 seconds and turn it on again, this way the pages counter that was telling you the ink waste was full is now reseted. see image...