Make an automatic driver installation when using the Windows 7 operating system, follow the steps below, and if you have any questions, type a comment.
The Windows 7 operating system gives us the ability to install printer drivers without, thanks to the large number of printers that are already installed on the database system.
Suffice only with a driver update and this will give us the ability to print and use the printer as it is has been installed from a CD or downloaded drivers from the Internet.
The process for automatic driver installation when using Windows 7 is simple, just enough largely to connect the printer to the printer.
When we connect the printer to the computer via the USB cable into the bottom right will begin to present which has recognized new hardware, the signal from a device connected through the USB and update appear in this corner.
What has been said in the previous paragraph is in the best case, worst case scenario is when the printer says it can not find the driver or the port where we have connected the printer is not strong enough to detect it immediately.
Significantly, it is necessary that the printer is on for the automatic installation is performed. In case the installation does not want to do, we go to properties of equipment and update the drivers from the device manager, if not installed can help finding the files when decompressed in a specific folder.
You can see in the picture above appears with the symbol alert the printer driver, the right click option and upgrade the Internet.
The computer will search for drivers all over the net, for this option to work the computer must be connected to the Internet, it may take a few minutes to update.
 |
| printer and dog |
The process for automatic driver installation when using Windows 7 is simple, just enough largely to connect the printer to the printer.
When we connect the printer to the computer via the USB cable into the bottom right will begin to present which has recognized new hardware, the signal from a device connected through the USB and update appear in this corner.
What has been said in the previous paragraph is in the best case, worst case scenario is when the printer says it can not find the driver or the port where we have connected the printer is not strong enough to detect it immediately.
Significantly, it is necessary that the printer is on for the automatic installation is performed. In case the installation does not want to do, we go to properties of equipment and update the drivers from the device manager, if not installed can help finding the files when decompressed in a specific folder.
 |
| device administrator |
The computer will search for drivers all over the net, for this option to work the computer must be connected to the Internet, it may take a few minutes to update.
COMMENTS