How cartridges Canon CL-31 are filled | en.Rellenado

How cartridges Canon CL-31 are filled

Advertisements
These ink cartridges have high performance and good quality when printing, have already seen how to refill cartridges Canon PG-30 black ink, both cartridges can get about 3 backfilled and still working perfectly, it is recommended to put to these cartridges about 6ml of ink in each color, the combination of these cartridges are in the following colors, you can take as a reference an image of a cartridge below.

The procedure for filling the Canon Ink Cartridge CL-31 tricolor is simple we only have to supply the ink slowly as it should on all ink cartridges, as always it is recommend putting the cartridge on a piece of fabric which does not allow  ink to spill, the fabric must not be a needed one in the future.

Other factors to consider are the ink may be spilled into our hands or our clothes; we need to know how we can remove ink spills. Cartridges Canon CL-31 tricolors are compatible with the iP1700, MP150, MP160, MP170, MP450, MP460, MX300, MX310 printers.

We recommend that you use water-based ink that can be got easily on any computer shop, if you will only make it possible to achieve pigment ink better.

Before refilling the cartridge we have to remove the label from the top, get the holes to refill the cartridges under the label, these are three perforations on the cartridges, on these holes we can introduce syringes ink slowly or we can make hole with a drill. see image below...
drill for cartridge refill
drill for cartridge refill
In case you decide to fill by the hole do it very carefully to prevent this reaches sponge cartridge.

Remember you have to use three syringes for ink, you cannot use the same syringe for all colors, it is a syringe for each color.

It is recommended that the syringe that it is introduced of the way we have previously outlined, do it slowly, firmness and with strength for each of the holes in the cartridge.

Remember that this cartridge supports the exact amount of ink 6ml and with the combination as shown in the table above that indicates how you ink should be. If it is necessary and you are not sure where the colors go pass the head of the cartridge with a napkin.
location cartridge colors
location cartridge colors
After filling the cartridge we recommend that a proper cleaning cartridge is made to prevent damages on the connectors and then present these errors also we recommend printing a test page to identify the operation of these.

In case the printer does not recognize the ink or said ink cartridge has not ink there is no problem this is normal. Also it may be that when printing says that there is a problem with the refilled cartridge, to fix this you have to reset the Canon printer.

Advertisements

No comments:

Post a Comment