How to remove paper jam in printer Epson Stylus Office T1110 | en.Rellenado

How to remove paper jam in printer Epson Stylus Office T1110

When paper does not feed into our impression, or crumpled remains within the printer, it is necessary that we remove a paper jam.

As we have said many times, there may be different jams, it all depends on what the situation, you may even have a paper jam that does not really exist, either because the printer is jammed above and the sensor paper jam stays on, or that there is a small part of paper or any other object that causes the paper jam.
Below we present a possible solution to the paper jam may have on the Epson Stylus Office T1110 printer.

If the pages do not advance, remove the pages and organize the pages and place them in the right way in the inbox of the printer.

Do not load thick paper in the printer, verify that type of paper the printer supports his and in the manual of the printer before printing any document verify that you are using the correct paper.

If the paper gets jammed, press the delete button jammed paper and follow the instructions, the paper is expelled, if the paper does not eject and remove it slowly get stuck, do this very carefully, it is recommended that see the manufacturer's documentation.

In case of paper falling apart inside the printer, remove it carefully and slowly lift the lid which gives access to the rails printing, do not pull the paper to back it may damage the lane to process the paperwork. It is recommended to place the printer on a flat surface.


No comments:

Post a Comment